Not Another Typical Day in the Office! UWS Exposed to Carbon Monoxide

Monday the 12th of January 2026, started off as any other Monday. It was the start of our 2nd working week for 2026, and most staff had returned from the holiday break. Then, around 10am, our smoke and gas alarm sounded. Initially it was just an alert warning, but some staff who had the monitor linked to an App on their phones, saw that it was warning us of high carbon monoxide levels.

Like most businesses, Urban Water Solutions completes regular evacuation drills that prepare us for events that we hope will never occur. But this was not a drill!

Within 5 minutes from the initial alert the smoke and carbon monoxide alarm issued a verbal warning telling us to evacuate. Carbon monoxide levels were now dangerous, exceeding 100 parts per million.

The Emergency Control Organisation quickly stepped into action, and an orderly evacuation was ordered. The Chief Fire Warden and Fire Warden ensured no one was left behind. Everyone gathered at the emergency meeting point for a head count. The emergency services were called, and fire engines arrived promptly, including Melbourne’s first electric fire truck.

As we left the building, we soon discovered that the cause of the alarm was contractors working in the ground floor premises next door, who were operating petrol generators inside the building to run concrete polishing equipment. They’d assumed that this would not be a problem as a roller door was left open. However, the fumes were free to rise into our office via stair wells and a shared roof cavity. Upon drawing their attention to the carbon monoxide alarm we had received, the contractors immediately turned off their generators.

The Fire Wardens then ensured that other offices in the complex were also notified. Carbon monoxide is an odourless and colourless gas and without appropriate monitoring, it would go undetected.

Due to the health and safety concern, our Health and Safety Representative notified WorkSafe. WorkSafe has since investigated on site and will ensure safe working practices in future.

The emergency services crews used high powered blower fans to displace the dangerous gasses from the office and after an hour we were given the all clear to re-enter.

The key takeaways for us are that we were pleased to have installed a carbon monoxide detector despite having no gas appliances. Such monitors are not compulsory for most office situations. Carbon monoxide can be a silent killer, and although the levels we detected were low, at 109 PPM maximum, they would have increased if we had not been alerted and stopped the contractor’s works. Also, fire drills are not waste of time. In this case of a real-life emergency, the benefits of practice drills ensured a well-executed evacuation with everyone able to return home safe and well.

Ozwater’26 Presentation on Integrated Sewerage and Stormwater Modelling

In Brisbane on the 27th May 2026 at 12.15pm?

Come and listen to Andy Chan (Melbourne Water Corporation) and Stephen D’Agata (Urban Water Solutions) as they discuss why integrated modelling is necessary to understand the interaction between separate sewerage and stormwater systems.

Combined models of Melbourne’s sewerage and stormwater networks were simulated with design rainfall events (ARR2019 18.1% AEP rainfall intensities and profiles) to provide a clearer picture of how these networks interact during rainfall events. The sewerage system includes emergency relief structures (ERS) that allow sewage to overflow into the stormwater system to protect customers and assets. The picture below shows an ERS at the base of the ladder and the Dandenong Creek at normal flow level.

The figure below is an example of where elevated levels in the stormwater/drainage system (shown on the right) prevent the sewerage ERS from operating. This results in higher surcharge levels in the sewerage network that would be expected, but less overflow to the receiving environment.

Ozwater is an annual three-day conference and exhibition featuring a strong line-up of international and national keynote speakers, scientific and technical papers, case studies, workshops, panel sessions, and poster presentations.

To discover other interesting presentations, please use the link to access the latest Ozwater Program.

 

Ann Pugh Presents at Autodesk ANZ Water Infrastructure Roadshow – Melbourne

 

Autodesk’s ANZ Water Infrastructure team recently held a series of roadshows across Brisbane, Sydney, and Melbourne. The roadshows combined case studies from users of Autodesk’s Water Infrastructure products, with presentations from Autodesk on product developments and enhancements.

Read more “Ann Pugh Presents at Autodesk ANZ Water Infrastructure Roadshow – Melbourne”

Autodesk Authorised Training Centre

Did you know that our partner Civil Survey Solutions, who Urban Water Solutions assist with sales, support, and training for Autodesk Water Infrastructure Solutions products, is accredited as an Autodesk Authorised Training Centre (ATC) As such, they are the only Autodesk ATC in Australia able to provide training services for Autodesk’s hydraulic modelling products. This is not to say that other training providers aren’t available, but they do not have Autodesk ATC accreditation.

Urban Water Solutions provides Civil Survey Solutions with the benefits of access to individuals with decades of experience in hydraulic modelling, and an experienced team of modellers who use the software daily to provide solutions to water infrastructure problems.

Through our partnership, we have provided in-house training to Civil Survey Solution customers in Australia and overseas.

Training can be provided in-house, online, or at one of Civil Survey Solutions’ training labs. So reach out to Ben at Civil Survey Solutions or Stephen at Urban Water Solutions to discuss your hydraulic modelling training requirements.

Welcome Ben Caplikas to Urban Water Solutions

Urban Water Solutions has added a new engineer to our rapidly expanding (relatively speaking) workforce.

Environmental Engineer Ben Caplikas joined us in mid-September 2023 and was immediately put to work on one of the many network modelling projects that we currently have in progress.

An honors graduate from RMIT University, Ben comes to UWS with over 2-years’ of experience in contaminated land management but is rapidly finding his feet as a hydraulic modeller.

Celebration of work performed on Greater Western Water Engineering Services Panel

Six-years’ of partnership in delivering engineering services to Greater Western Water was celebrated recently at Beca’s Melbourne office. Urban Water Solutions (UWS) is one of a team of consultants led by CH2M Beca, who were originally appointed to Western Water’s Engineering Services Panel in 2017.

Read more “Celebration of work performed on Greater Western Water Engineering Services Panel”

Urban Water Solutions Contributes to Award Winning Sewer Relining Project

Urban Water Solutions was engaged by the John Holland – KBR Joint Venture to provide hydraulic analysis for sewer flow management associated with a project to renew Melbourne Water’s Epsom Road Main Sewer. The sewer, which was originally constructed over 100 years ago, provides an essential link between major sewers in Melbourne’s sewerage network. This renewal required the installation of over 3.5km of pipes and associated pump systems for sewage bypass at 12 locations for flow rates of up to 550 l/s.

Read more “Urban Water Solutions Contributes to Award Winning Sewer Relining Project”